Solar Limpets Slate System
Suitable for side mounted PV rail systems for both portrait or landscape orientation, Solar Limpet's patented adjustable design and installation techniques can save you up to 80% on current installation times, at the same time reducing slate breakages by a staggering 90 to 100%.
Key Features
Fixing
For slate installations Solar Limpets use a combination of EPDM seals and a patented base plate design that retains and directs CT1 sealant into the fixing screw hole. Slates do not need to be removed or cut. Please see the fixing guide in downloads for more information.
Cable Entry
The Solar Limpets Tile Blank is simply adapted to provide an efficient, effective 4 or 6mm cable entry point. Please see the fixing guide in the downloads section and the support area for more information.
'L' Bracket for Vertical Rails
The Solar Limpet Metal 'L' Bracket adapts the Limpet Adjustable Bracket to enable the use of rails mounted top to bottom, required for some landscape panel orientation options. Please see the fixing guide in the downloads section and the support area for more information.
FAQs
Once trained 3-4 hours for a 4kwp install will be the norm.
No slate removals necessary. Not even to find the rafters.
No Breakages. Even when the Limpet roof hook is stood on!
No cutting or notching required.
No slate removals required.
Limpets can be simply adapted to provide a weatherproof 4 & 6mm cable entry, for both slate and tile applications.
Fixed into the rafters but over the battens, Limpets automatically spread any vertical loading via the battens to adjacent rafters.
No slate cutting is required.
No. The Limpets patented seal housing automatically ensures the Limpet remains weathertight.
With no slate ripping, grinding, cutting, or flashings required to install, they are simple and quick to install for any tradesmen, even electricians. LOL.
Yes. The Limpet rail bracket is simple to adjust, even after the panel has been fitted. Allowing you to level up the panels accurately.
Yes. As slate removals are not required, the foaming will not affect the Limpet install.
Limpets are suitable for most slate other than Hardrow and artificial and natural type stone slates. See slate type identification.
Yes, but speak to Solar Limpets technical support before proceeding.
Yes. See Cambrian Slate for additional information.
Slate Type Identification
Click arrows to view next steps
Natural 20x10 Slate
Suitable for Solar Limpets. (Up to 10mm thick)
Cement Fibre 20x10 Slate
Suitable for Solar Limpets. (Up to 10mm thick)
Cambrian Interlocking Slate
See Cambrian slate information
Hardrow Slate
Not recommended for Limpets. Suggest using an integrated system
Natural and Artificial Stone and Slate Over 10mm Thick
Not recommended for Limpets. Suggest using an integrated system.
Cambrian Slate Information
These slates are thin, single-skinned, interlocked top and sides and fixed with nails and metal clips.
Installing Solar Limpet roof hooks onto these types of slates should not be attempted until the installer has some experience on standard-type natural and artificial slates and the following document information has been read and understood.
Download the document.
They are exceedingly difficult to replace. Replacing a broken slate due to careless feet/knees or poor installation technique may involve substantial stripping of the remaining slates and referring to the Redland repair system illustrated in the download document.
Downloads
'L' Bracket for Vertical Rail Mounting Fixing Guide
'L' Bracket for Vertical Rail Mounting Fixing Guide
Test Reports
Wind Uplift, Weathertightness and Snow Load Testing
Wind Uplift, Weathertightness and Snow Load TestingWarranty
Solar Limpets are warranted for 20 years, providing the installation instructions are complied with, and the roof has been surveyed as suitable for PV installation.
To maintain the Solar Limpets product warranty, Solar Limpets must ONLY be installed by persons trained & certificated by Solar Limpets.
Contact us
Call Sales
Emma Graham – Kate Weeden – Emma Booth:
01993 869278
Call Technical Support
Carl Reynolds:
07968 231145